Hadco Landscape Lighting
Hadco RSC2 (Black)
120-Volt
Outdoor Lighting

Housing: Die-cast aluminum back box contains less than 0.3% copper to prevent corrosion in concrete or masonry applications. Die-cast aluminum trim ring contains less than 0.3% copper to resist corrosion. Cast bronze fixture has polycarbonate, color impregnated, dark bronze finish. Cast bronze louver is natural cast bronze with frosted tempered glass. Die-cast copper-free aluminum with 45 degrees cutoff, with frosted tempered glass. Gasketing is silicone. Fasteners are 300 series stainless steel. Note: Recessed housing contains four (4) 1/2" NPS conduit inlets (two (2) on bottom and one on each side) and internal pull-through wiring compartment.

Finish: Thermoset polyester powdercoat is electrostatically applied after a five-stage conversion cleaning process and bonded by heat fusion thermosetting. Zinc-rich primer and thermoset powdercoat for durability.

Optical Assembly: Symmetric reflector is precision formed, steel with a white reflective coating. The cast louver offers lower light levels with cut-off for lighting stairways or general lighting where shielding of the light source is more important than high light levels.

Lamping: 40W maximum T10 (4KV medium base porcelain socket). Lower wattage lamps are acceptable.

Electrical Assembly: Fixture is pre-wired with 18 AWG black, white, and ground wires.

Warranty: Three-year limited warranty.

Certification: UL Listed to U.S. safety standards for wet locations. cUL Listed to Canadian safety standards for wet locations. Manufactured to ISO 9001:2000 Standards. ADA Compliant when used in indoor and outdoor wall applications.

Height: 3 1/2" (90mm)
Width: 9" (229mm)
Depth: 3 1/2" (90mm)
Max. Weight: 3.64 lb.
Color: Black

Free Shipping!!!
(within the continental U.S)
Click here for details>