SmartLine 4-Zone Base Model Indoor

Customer Account | Shopping Cart | Check Out

Search our site

Vanishing Water Kits Waterfall & Pond Kits Bubbling Rock Kits Accessories

12-Volt Lighting 120-Volt Lighting Outdoor Lighting Packages

Root Barriers Bamboo Barriers ArborTie Rain Gear

Irritrol PC Controller Smart Line Controller

About SSL Certificates

Home

About Us

Irrigation Controllers > Smart Line Controllers

SmartLine 4-Zone Base Model Indoor

Weathermatic: Smartline Control SL800
Indoor model, with a base of 4 zones

FEATURES:

4-zone base model, expandable to 8 zones using slide-in SLM2
2-zone hot-swappable modules (Indoor rated)
External transformer with plug-n-play barrel connector
Skip circuit and slow blow fuse protection with green/red LED status indicator
Large LCD display
2 run modes: Standard mode runs user input zone run times; Auto Adjust mode requires SLW Series On-Site Weather Station to calculate weather based run times that override user input zone run times
Rain/Freeze sensor bypass/active button located on face panel displays sensor status with tri-color LEDs (red indicates sensor is prohibiting irrigation; orange indicates an extended rain delay after weather station rain sensor permits irrigation; green indicates normal operation)
4 programs: A, B, C; program D can operate concurrently
8 start times per program
Nonvolatile memory and real time clock/calendar circuit to retain programs as well as correct date and time - with no battery required
Zone run times settable from 1 min. to 9 hrs. 55 min. with operation countdown displayed in hours, minutes, and seconds (zone run times overridden by weather based calculated values in Auto Adjust mode)
Watering day selections of custom days of the week, odd/even, or interval days
Omit settings: omit time of day window, omit day(s) of week, and omit up to 7 calendar dates
Seasonal % adjust by program, by month for simple year round water budgeting (monthly percentages overridden in Auto Adjust mode)

ADVANCED FUNCTIONS:

Fault review displays all faults, including open and shorted zones
Diagnostic test function using on-board multi-meter displays transformer voltage; milliamp measurement for each zone
Built-in valve locator function for locating hidden valves by simply listening for the audible chatter of the solenoid created by a unique electrical frequency (patent pending)
Review menu displays accumulated ET deficits by zone (in inches) and corresponding zone run times for the next available watering day
Review menu displays maximum run time and minimum soak time used during Auto Adjust mode
Review menu displays temperature readings (daily high/low) for previous 5 days
Review menu accumulates total run times by zone from the last reset date
Review menu provides the ability to clear deficits for all zones
Rain delay of 1 - 7 days may be selected (to pause and automatically resume operation)
SLW weather station extended rain delay programmable from 0 - 99 hours
Run/Soak cycles allow setting of maximum run time and minimum soak time by program for use in Standard mode only
Zone-to-zone delay programmable for 1 min. - 3 hrs. to accommodate slow closing valves and recharging of water supply
Master valve timing sequence with zone valve programmable by "On Delay" (1 sec. - 1 min.; 2 sec. default) and "Off Delay" (1 sec. - 3 min.; 5 sec. default) to allow for line fill and slow closing valves
Master valve/pump start operation assignable On/Off by zone
Clear program function to selectively delete an individual program
Clear All function to delete all programs
Backtrack Stored Program" feature allows contractor to easily store a default program and retrieve the saved program in the event a customer improperly reprograms the SL800

AUTO ADJUST FEATURES:

ZIP Code input (5 digit) or Latitude input (+60degree from EQUATOR) establish location of site for solar radiation calculation
Sprinkler type input allows selection for zone sprinkler type (SPRAY, ROTOR, DRIP, BUBBLER) with preset precipitation rate or specific input of the zone precipitation rate (.2 - 3.0" per hour)
Plant type input allows selection for zone plant type (COOL TURF, WARM TURF, SHRUBS, ANNUALS, TREES, NATIVE) with preset crop factors or specific input of the zone crop factor (10 - 300%)
Soil type input allows selection for the soil type (CLAY, SAND, LOAM) and slope (0 - 25degree) for the purpose of automatically calculating a run/soak period to virtually eliminate run off
More/Less is settable by zone (-50% to +25%) for the purpose of fine tuning Auto Adjust run times to accommodate factors like shade, wind, and sprinkler inefficiencies

MANUAL OPERATION:

Manual test runs each zone with zone run times from 10 sec. - 10 min.
Manual zone operation of a single zone (1 min. to 9 hrs. 55 min.)
Push button manual start of a program from control panel

ELECTRICAL FOR SL800:
Input: 120VAC/60Hz @ 250mA for 3 valves
Output: 28VAC, 720mA maximum
Fuse: 1.0A, slow blow

EXPORT: DIMENSIONS:
E-SL800 (EU Plug) 230VAC/50Hz 7" W x 7-3/4" H x 1-3/4" D
E-SL800A (Australian plug) 230VAC/50Hz 17,8 cm x 19,7 cm x 4,4 cm

Ships within 48 hours

Brand: Weathermatic

Item Number: SL800

Availability: In Stock

Price: $77.96